Operating instructions iQ-Oval CDS V1-4.docx
page 60 of 66
9.8.3.
Error messages tablet
If an error is recognized by the control unit a message will be displayed on the tablet.
Beside an error message you get an error description and an error number. After the
error reason is eliminated the message must be cleared. An emergency shutdown
must be confirmed first with the “error
-reset-
button” on the backside of the control
panel and afterwards with the “Confirm
-
Button” on the tablet. Other m
essages must
be confirmed two times on the tablet.
9.8.4.
Error messages terminal
Error messages will be displayed in red with
error number and error text.
After the error reason is eliminated the message must be cleared. An emergency
shutdown must be confirmed first with the “error
-reset-
button” on the backside of the
control panel and afterwards with “F1” on the terminal. Other messages must be
confirmed two times on the terminal.
9.9.
Trouble shooting
Error number
Error message
Error
description
Confirm-Button
Before trying to locate any fault, it must be made sure that the
machine may not move unintentionally. Before entering the danger
zones, one of the machine’s safety facilities/devices must be
actuated; in case of required work on current-carrying parts, the
machine must be cut off from the supply voltage (using the main
power switch).
