MHG Heating procon gwb smartline, Installer And User Manual

Page: 13 / 27

13
ENGLISH
MAN
AUTO
OFF
ON
MAN
AUTO
OFF
ON
MAN
AUTO
OFF
ON
MAN
AUTO
OFF
ON
MAN
AUTO
OFF
ON
MAN
AUTO
OFF
ON
1 2 3 4 5 6 7
1 2 3 4 5 6 7
1 2 3 4 5 6 7
12:34
17:34
15:22
●
Press
P to confirm and store the new value
●
Use the same (above) sequence for the subsequent ON/OFF settings and
subsequent days.
●
Once the programming of C1 (Heating) channel has been completed, the
programmer sequence will automatically move on to C2 (Hot water).
NOTE
If no buttons are pressed within a 10-second period, the programmer will exit
the programming mode and revert to the normal display.
To review the current stored programmes, press and release the P button
whereby the display will scroll through the current stored programmes. To exit
and return to the current operating mode, press and release the P button.
OPERATING MODES
Each channel (C1 & C2) has 3-different modes of operation:
Automatic: using the stored ON/OFF settings
ON: 24-hours each day
OFF: 24-hours each day
To change the operating mode, press either C1 or C2 (depending on your
preference) and select the desired mode of operation.
ATTENTION
The device keep the correct watch value until 168 hours absence of
alimentation. This is right if the device has been powered continuously fro 48
hours. Only after this continuously alimentation period the watch retention is
guaranteed.
If the device have loss the watch value, the 00:00 watch value blink in the
display and is necessary a new watch set.
In this case watch is stopped and channels disable.
Manual operation - OFF
Manual operation - ON
MAN
AUTO
OFF
ON
MAN
AUTO
OFF
ON
1 2 3 4 5 6 7
12:34
Automatic (programmed settings)