13
24.11.14 / V 01.0-EN
Operating
10 f.
As a last step screw the axis with the guide bearings
belonging to the milling head into the milling head by
using the hex key SW6 and your machine is again
ready for operation.
11.Changing the indexable cutting inserts
Property damage caused by blunt tools
Overcharge of the machine!
Regular testing of tools for abrasion is recommended.
Please wear protection gloves when changing the
indexable cutting inserts.
In order to change the cutting inserts which can be
used with the edge milling machine HBM 15, kindly
proceed as follows:
Place the machine on the upper surface and turn the
guiding plate downwards as much as necessary to get
the cutting inserts totally free so that you can turn
them easily or exchange them.
Always use a Torx T15.
We recommend to change defective plates or insert
screws immediately.
To avoid a turning away of the milling tool, lock
the drive shaft with the lock button.
For all maintenance machine must
be disconnected from the power supply
system!
