6
24.11.14 / V 01.0-EN
6.
Specific Safety Instructions:
Improper use can cause serious injury
•
Don't reach with your hand into working area.
•
Always hold the machine with two hands.
•
Make sure you always have a safe position when working with the machine.
•
Never touch the milling head when the machine is running.
•
Do not use the machine for overhead work.
•
The machine should only be used for up-cut milling.
Risk of injury from metal chips
•
Hot chips are ejected from the machine at high speed.
•
Use impact protection.
Risk of injury from ejected indexable inserts
•
Use only original MGS inserts and clamping screws.
•
Tighten the clamp screws with 3 – 4 Nm torque.
Health risk in case of inhaling cutting oil
•
Sufficient venting is essential for working with cutting oil.
•
Do not inhale arising vapors.
Improper use can damage equipment and property
•
Risk of machine being damaged or destroyed.
•
Do not lift or carry the machine by its power cable.
•
Make sure the cable is directed behind and away from the machine.
Do not pull the cable over sharp edges.
•
Servicing and testing must be done by qualified personnel only.
•
Always use original MGS spare parts and accessories.
Safety Information
