27
24.11.14 / V 01.0-EN
Slide this protection switch
to the left then press the starter and hold it.
The starter will not engage. If you release it the motor stops.
If the motor has reached the set speed you can start milling.
Please note that you can always up-cut milling. This means that you always work from left to right
and in holes or cutouts in clockwise.
If you have processed your material, remove the machine from the material
and release the starter switch. Once the motor is switched off wait for the
standstill before placing down the machine.
Check the bevel size and if necessary correct the machine setting.
Recommendation:
In order you get to know your edge milling machine start with a small chamfer
width. You will fast learn the easy handling of the machine and than to edit
larger chamfers.
Please note that the larger the bevel is set the more material must be
removed.
The burden for the user and the machine increases, the vibrations get higher
and the inserts wear out faster.
Often it is better to mill the material in several strokes.
It is better for the machine and the inserts
.
Machine operation
7
