Page 13 of 32 A10H0321-NA
Components description
1 - Rotor shaft
2 - Rotor shaft key
3 - Drive end bearing
4 - Drive end endshield
7 - Stator frame
11- Fan
12 - Fan assembly
15 - Non-drive end bearing
17 - Non-drive end endshield
26 - Fan cover
28 - Terminal box screws
29
–
Double terminal box
30 - Terminal board
32 - Cable gland and plug
36 - Flange endshield (B5)
37 - Flange endshield (B14)
38 - Elastic washer
51 -
“T” key for
manual shaft
rotation (available on request)
53 - Encoder ( - E series, this
component is not shown on the
drawing)
57 - Forced ventilation (- AV
series , this component is not
shown on the drawing)
87 - Terminal box cover
88 - Tie rod assembly
Motor Disposal
Motor must be disposed according to the applicable laws and regulations of
the country where the motors is located at the moment of its disposal.
At the end of its useful life, the product must not be disposed of as urban waste
but must be collected separately from other waste and sent for recovery or
possible disposal according to specific methods for avoiding possible negative
effects on the environment and to health, and for favouring its re-use and/or
recycling of the materials of which it is made up. The greater part of the motor
is made up of materials (steel, copper, aluminium, etc…) which could be re
-
used/recycled, thus contributing towards safeguarding the environment.
Please contact MGM for further information.
Summary of Contents for SM-SMX Series
Page 30: ...Page 30 of 32 A10H0321 Notes...
Page 31: ...Page 31 of 32 A10H0321 Notes...
