Page 11 of 32 A10H0321-NA
Periodical mandatory operations to guarantee a correct MGM motor functioning are
listed here below. The frequency of inspection depends on the particular motor duty
((i.e. environmental conditions, presence of dust, vibrations). Generally, it's advisable
to proceed with the first inspection just after 2-3 weeks of working and to draw up a
periodical maintenance plan. Anyway, it's recommended to perform brake motor
inspections at least once a year.
For specific information please contact the M.G.M. motori elettrici S.p.A. organization.
1.
Verify periodically that the motor is properly working without abnormal noise
or vibration. In particular verify the bearings noise, if any. MGM standard
bearings are lubricated for life therefore no oil refill is normally required. If
bearings need to be replaced, always use the same type of those originally
used on the motor.
2.
Verify that motor ventilation air inlets are not obstructed. When the motor
operates in dusty environments, performing this check is much more
important and it has to be done more frequently.
3.
Verify that the motor power supply wires and the earth cables are securely
fastened.
4.
Check that the power supply wires and the earth cables are in good
conditions.
5.
Check that the motor is properly mounted either through the feet or the
flange. Check that the mounting bolts are properly tightened. If the motor is
foot mounted
make sure that the feet aren’t
cracked or otherwise damaged.
6.
Verify that the full load motor current is congruent with the data stated on
the name plate (I Amps).
Summary of Contents for SM-SMX Series
Page 30: ...Page 30 of 32 A10H0321 Notes...
Page 31: ...Page 31 of 32 A10H0321 Notes...
