www.mgeups.com
T H E U N I N T E R R U P T I B L E P O W E R P R O V I D E R
Network Management Cards – User Manual
34003676EN/AA
Page 33/42
5 Configuration in local mode and via Telnet
5.1 Configuration in local mode
◗
Use the cable supplied with the card.
◗
Connect the card to a computer equipped with a hyper-terminal type emulator. The serial link
should be set at 9600 bauds, 8 bits, no parity, 1 stop bit and no flow control.
◗
Check that UPS power is on.
◗
A few seconds after terminal opening, press the "
Enter
” button. The menu asks you to enter your
password (
MGEUPS
by default), and then press
“
Enter
”.
◗
The card will disconnect itself after 3 minutes of inactivity.
◗
The menu is in English only.
+===========================================================================
+
| [ MGE UPS SYSTEMS SNMP/Web agent Configuration menu ] |
+===========================================================================
+
Enter Password: ******
+===========================================================================
+
| [ MGE UPS SYSTEMS SNMP/Web agent Configuration menu ] |
+===========================================================================
+
1. Agent Configuration
2. UPS Parameters
3. Access Control Table
4. Set NMS Parameters
5. Reset Configuration To Default
6. Reset Agent
0. Exit
Please Enter Your Choice =>
5.1.1 Choice 1: SNMP agent configuration menu
The blue lines are those displayed on screen.
+============================================================================
+
| [ Agent Configuration Menu ] |
+============================================================================
+
SNMP/Web Agent Version
: CA (SN 49DC40116)
Indicates the version level of the software and the serial number of the card.
Ethernet address
: 00 E0 D8 09 85 78
MAC address of the card.
Agent BIOS Version : AB
Version number of the BIOS.
1. IP Address : 172.17.133.120
