www.mgeups.com
T H E U N I N T E R R U P T I B L E P O W E R P R O V I D E R
Network Management Cards – User Manual
34003676EN/AA
Page 14/42
3.3 Logs
3.3.1 Measurements
Click on the
“Measurements”
section in the menu
.
The following measurements are saved and time-stamped:
◗
“Input voltage”
: Value of the utility voltage supplying your UPS (average of 3 phases for UPSs
equipped with a 3-phase input)
◗
“Input frequency”
: Value of the utility frequency feeding your UPS
◗
“Output voltage”:
Value of the output voltage of your UPS (average of the 3 phases for UPSs with
a 3-phase output)
◗
“Output load”
: Value of the percentage of load at UPS output (Value of the most loaded phase for
3-phase UPSs)
◗
“Battery capacity”:
Percentage of charge available in the battery
◗
“Remaining time”
: Estimation of the remaining backup time
The save frequency of these values is defined in the
“System”
page (60 seconds by default).
Approximately 500 time-stamps are stored permanently on the card.
◗
“Save”
button enables all saved values to be opened or saved in CSV format (compatible with
Excel type spreadsheets)
◗
“Clear”
button enables deletion of all records. The administrator must enter his/her login /
password to validate this action.
Select the time range to view
