www.mgeups.com
T H E U N I N T E R R U P T I B L E P O W E R P R O V I D E R
Network Management Cards – User Manual
34003676EN/AA
Page 21/42
3.4.3 Manager table (trap addresses)
Click the
“Manager table”
section in the menu.
This menu enables the addition of the supervision stations receiving traps in the list of managers and
configuration of the trap type:
Up to 32 destinations can be managed by the card.
Note:
It is not necessary to add the
UM-Clients
protecting your servers in this list as
UM-Clients
are
automatically added/deleted.
Select an entry in the list to modify the values in the edit zone at the bottom of the page.
◗
Device no.
field: Use the “0” value for all manual entries.
◗
NMS type
field: Select the value corresponding to the type of NMS used. Possible choices:
>
UM-Client
>
DEC-NetView
>
UM-View
>
D-View
>
HP-OpenView
>
Sun-SNM
>
Novel-NMS
>
IBM-NetView
>
Other
>
Autolearning
◗
Protocol
field: Select the “SNMP V1” value to validate trap transmission or “invalid” to block the
traps.
