manualshive.com logo in svg

MGDVRs ACAP series, Installation And User Manual

Share
Download
MGDVRs ACAP series Installation And User Manual Download Page 60

 

 

 

 

                                                                                                                                                                   

59

     

MGDVRs

 

w w w .

MGDVRs

. c o m

 

 

 

4. MC (Media Control) Setup 

Due to the variety of the sound controller while it is making a transition to high-quality on-board 
controllers, the configuration and the behavior are not standardized. Therefore, it is required to 
run “MCSetup.exe” prior to utilize audio recording function of MGDVRs products. It is located 
under MGDVRs DVR (or DVR System) folder. MPG / AMX Series products and the 16 channel 
audio board do not require this procedure. Before running MCSepup.exe, make sure to connect 
speaker and microphone, and verify the connection using sound utility tool, provided with the 
motherboard or sound card. The following instruction and pictures are based on SigmaTel Audio 
device, and terms for controls may be different for other devices. 

Note: The color set of the audio ports may be different depending on the motherboard. However, most 

motherboards generally use blue for Line In, pink for Mic. In, and green for Line (Speaker) Out. 

 

Media Control Setup 

• Run “MCSetup.exe”. 

 

Select a device to setup, 

and click next. 

 

 

 

 

 

 

 

 

• Mixer Controls Setup 

 

If there are more than two 

devices available, make 

sure to select a correct 

device. 

 

 

 

Summary of Contents for ACAP series
































































Reviews:

No comments

Brands by name

Popular brands

Load more brands