manualshive.com logo in svg

MGDVRs ACAP series, Installation And User Manual

Share
Download
MGDVRs ACAP series Installation And User Manual Download Page 50

 

 

 

 

                                                                                                                                                                   

49

     

MGDVRs

 

w w w .

MGDVRs

. c o m

 

 

 

This program is used to decipher image or AVI files stored from ‘Search’ or ‘Backup Viewer’ programs 
and distinguish between original and altered files 

:  Select “JPEG” or “AVI” and press this button to load a corresponding file format. If the 

image or AVI file has not been altered, it will display corresponding file information as above 
screenshot – otherwise, no information will be shown.   

 
8-4. AVI Viewer

 

 

This program is used to play back mp4 format data, created by MGDVRs software. 

  :

 Go to beginning of the clip. 

: Play by 1 frame at a time (back).   

  : Play (with sound if exist). 

: Pause. 

: Play by 1 frame at a time (forth). 

 : End. 

  : Open file. 

  : Display Windows type Menu and frame.   

  : Adjust image size.    Double click on the screen for Full screen mode. 

  : When there is sound, click this button and then click play back button 

  : Sound volume 

 

: Click to perform faster search (Revival by frame unit.)

 

  : Speed control 

 

 

Summary of Contents for ACAP series
































































Reviews:

No comments

Brands by name

Popular brands

Load more brands