22
MGDVRs
w w w .
MGDVRs
. c o m
5.4. Camera
5.4.1. General
:
If selected, the
settings selected in
“General”, “Schedule”, “Color &
Motion” will be applied to all the
cameras (Note: some setting are not
affected by “Select All”).
If you would like to customize each
camera uniquely, select a camera
from the buttons on the left of the
menu (1-32) FIRST, then modify the
following options
•
Enable Camera:
Enable/disable camera. (Camera channel 1 is always enabled.)
• Basic setting
- Camera name:
Assigns name of the camera. (Name will be displayed in Main screen.)
-
Resolution:
Choose the desired resolution for the camera. (Note: higher resolution size of the
recording will lead to a lower frame rate.)
•
Adjust camera frame rate
- Maximum averaged frame rate:
Sets the recording frame rate to the maximum available rate
for each channel.
- Select frame rate by camera:
Allows manual setting of the frame rate per second.
Normal: Frame rate when the camera is scheduled as normal.
Event: Frame rate when the camera is scheduled as Motion or Sensor.
If the camera is scheduled as Normal & Event, Normal frame rate will be applied without event, and
Event frame rate will be applied when motion or sensor input is detected.
•
Security
-
Hide camera (Display):
If selected, current camera will not output its images on the monitor.
-
Remove from CCTV display:
If selected, current camera will not output its images through
Composite-Out (For LIVCAP and MPGAMX boards, this option may not take effect if “TV-out
auto switching interval” is set to “Normal”).
- Remove from network display:
If selected, current camera will not be displayed on remote
connections.
•
Compress format & rate:
Change the compression rate. (Moving bar to the left decreases the
size of the image file, but at the same time quality of image will degrade.)