51
83 – 4-wheel
Dismantling the steering
wheels
Before replacement or repair the steer-
ing wheel is to be disassembled by
unscrewing the centre hexagon nut
(fig. 83/
➀
).
☞
Note:
☞
After attaching the steering wheel
the centre hexagon nut (fig. 82/
➀
)
is to be screwed on tightly again.
☞
The valve points outwards.
Changing the tyres
Caution:
The screws at the outer edge of the
wheel rim (fig. 82+83/
➁
) hold to-
gether the rim halves and must not
be loosened until the tyre is fully
deflated.
– Danger of injury!
To exchange the tyre deflate it com-
pletely then remove the screwed nuts
of the rim (fig. 82+83/
➁
) and sepa-
rate the rim halves.
☞
Note:
The screwed nuts are located on the
opposite side to the valve.
83 – 3-wheel
1
2
1
2
