33
53
1
Adjusting the seat width over
the arm supports
The seat width can be steplessly ad-
justed by moving the arm supports
after loosening the clamping screw
(fig. 53/
➀
).
☞
Maximally push the arm support
outward up to the marker.
☞
After adjusting the arm support
retighten the clamping screw on
both sides.
Adjusting the distance seat to
tiller
After engaging the locking lever (fig.
54/
➁
) the distance of the seat to the
tiller can be adjusted.
☞
After adjusting the distance of the
seat let the locking lever snap into
place again.
☞
Note:
– Check the locking device of the
seat.
54
2
