Meyer BOSS RT FATBOY 1026RT RR, Owner'S/Operator'S Manual

Page: 34 / 44

Meyer Manufacturing Corporation - 34 - PB-FATBOY
• Using the visual indicator (Item 3) on each gearbox, check gear
lube in both gearboxes. The oil level should be at the top of the
sight glass when parked on level ground.
Remove the plug (Item 4). Add EP 80-90 gear lube as needed
(Lighter oil may be used in temperatures lower than 20° F) until
gear lube is at the top of the sight glass.
Monthly :
• Grease (2) jack assembly zerks (Item 5) located on the front face
of the jack.
• Grease the rear gate pivots (Item 6). Over-greasing is not
possible.
Annually :
• Change the oil in both gearboxes. Use EP 80-90 gear lube as needed (Lighter oil may be used in temperatures lower
than 20° F.).
Gear Box
3
4
Jack Assembly Lubrication Locations
5
Rear Gate Pivot Lubrication Locations
6