Meyer BOSS RT FATBOY 1026RT RR, Owner'S/Operator'S Manual

Page: 27 / 44

1-800-325-9103
PB-FATBOY - 27 - www.meyermfg.com
6.8.2 Brake Information
Two optional brake systems are offered for your forage box. A brake system is recommended for any forage box operated
on public roads and may be a requirement.
6.8.2.1 Lever Operated Hydraulic Brakes
This brake system is connected to the tractor remote hydraulic ports and is controlled by the tractor hydraulic system. The
two hose system has a hydraulic manifold with pressure relief to prevent the pressure to the brake activating cylinders to
exceed the relief valve setting.
Applying hydraulic pressure from the tractor causes tractor hydraulic fluid to flow under pressure to the pressure relief
valve and activates the brake activating cylinders to apply the brakes.
Applying The Brakes - Gradually move the tractor spool valve lever as required to apply the brake. The hydraulic
hoses should be connected to the tractor ports so the spool valve lever gives the expected response. Test this after
hooking up. If response is opposite of expected, reverse the hoses.
Releasing The Brakes - Move the tractor spool valve lever to the opposite direction and hold momentarily. Then
return lever to the “float” position.
NOTE: Simply returning the spool valve lever to the neutral position without first moving the lever to the opposite
position will not release the brakes.
6.8.2.2 Pedal Operated Hydraulic Brakes
This brake system is a one hose system. The single hydraulic hose must be connected to the tractor remote pedal port.
Applying The Brakes - Gradually apply the tractor brake pedal to apply the brakes.
Releasing The Brakes - Release the tractor brake pedal to release the brakes.
6.8.3 Reverse Lock Instruction (Steering Axle Option Only)
Connect the hydraulic hoses to a bank on your tractor. Apply pressure to extend the cylinders. This will lock the steering
axles in a straight position to allow you to back up. When you are done backing up, return the cylinders to their retracted
position.
When brakes are not required, the spool valve lever must be in the
“float” position on the tractor spool valve.
At no time should the brake system be used as a parking brake. With
loss of hydraulic pressure, the brakes will lose their holding power.