Meyer BOSS RT FATBOY 1026RT RR, Owner'S/Operator'S Manual

Page: 31 / 44

1-800-325-9103
PB-FATBOY - 31 - www.meyermfg.com
7.3 UNHOOKING THE TRACTOR
1. Park the implement on level ground. Put the tractor controls in neutral, set the parking brake, and turn the engine off
before dismounting.
2. Place wheel chocks in front and in back of the implement wheels on opposite sides to prevent the implement from
rolling after the tractor is unhooked.
3. Remove the hydraulic hose ends from the tractor hydraulic ports and secure the hose ends in the key slot holes on
the front of the box to keep them clean.
4. Remove the light cords and any optional equipment
connections.
5. Remove the jack from the storage mount and install it on the
hitch tongue. Crank the jack down until the hitch lifts off the
tractor draw bar.
6. Remove the hitch pin.
7. Unhook safety chain from tractor drawbar and intermediate
support.
8. Slowly drive the tractor away from the implement.
Never enter the forage box without shutting power “OFF” to the
machine. (See 5.3 SHUTOFF & LOCKOUT POWER on page 18.)
Never use “LIVE” power to aid in the clean-out of a clogged machine.
If the forage box becomes clogged, shut off all power to the forage
box and wait until all rotating components are completely stopped.
(See 5.3 SHUTOFF & LOCKOUT POWER on page 18.)
If any component fails, shut off all power to the forage box and move
the forage box to a safe work area. Repair or replace damaged
components before proceeding with unloading of the forage.
Hydraulic Hose Storage
Jack may not be designed
to support the implement
when it is loaded.