Metz MECABLITZ 36 AF-5 C digital, Operating Instructions Manual

Page: 91 / 156

ķ
91
6 Programmed Auto Flash Mode
In the programmed auto flash mode the camera automatical-
ly controls the aperture, the shutter speed, and the mecablitz
for optimal results in most photographic situations, including
fill-in flash.
Settings on the camera
Set your camera to Full Auto Mode, Program P or a
Programmed Image Control Mode (landscape, portraiture,
sport, etc.). Select the auto-focus mode on the camera.
Settings on the flash unit
Adjust the zoom position of the reflector to the focal length of
the lens or set the reflector straightaway to “28 mm”.
Having completed the above settings, you can commence
flash photography as soon as the mecablitz indicates flash
readiness.
7 Flash techniques
7.1 Bounce flash
Photos shot with full frontal flash are easily recognized by
their harsh, dense shadows. This is often associated with a
sharp drop in light from the foreground to the background.
This phenomenon can be avoided with bounce flash because
the diffused light will produce a soft and uniform rendition of
both the subject and the background. For this situation the
reflector is turned in such a manner that the flash is bounced
off a suitable reflective surface (e.g. ceiling or wall of the
room).
The reflector can be turned vertically up to 90°.
When turning the reflector vertically, it is essential to ensure
that it is moved by a sufficiently wide angle so that direct
light can no longer fall on the subject.
Consequently, always turn the reflector at least to the 60°
lock-in position.
The light bounced off the reflecting surfaces produces a soft
709 47 0253.A1 36AF-5-CNOPS 28.06.2010 9:42 Uhr Seite 91