4 Connecting, switching on and off
Power connection
Connect the TV set to the wall socket with the accompanying power cord.
Switching on for the first time
After a short wait, the Metz logo or a self-created picture appears as start-up screen (see
Ch. 21.2) on the screen.
The blue stand-by LED lights up green for "On".
When the TV set is switched on for the first time, the "Installation Wizard"
appears. It guides you through the settings that you have to make to start-up the TV
set if the settings have not been done by the dealer.
This includes the language, country, reception type and so on .
After about 10 seconds the TV set switches automatically to program position 1 or the
preset initial program position, see Chap. 21.1.
If no other command is received from the remote control, a message will appear after
approx. 10 minutes asking for one of the remote control keys to be pressed. Unless a
button is pressed on the remote control, the TV will switch to stand-by mode
after 10 minutes.
9
Power switch
Power switch
Fineo, Micos, Topas
+
Power connection,
backside
