28
9.5 Setting the SAT system, antenna system
The TV set must be configured for the SAT antenna system in the "DVB-S" menu.
Please ensure that the antenna connection is correct (Chap. 4.1)
Antenna system
Twin SAT
In the “2 cable” setting, the DVB-S receiver in the TV set is supplied 2 independent antenna
lines in the TV set.
Single cable (single cable distribution SDC)
With the "Single cable" setting, the DVB-S receivers have one feed line. The channel
selection is preset according to the structural conditions of the satellite system.
No antenna control signals can be sent over the feed line.
JESS (EN50607), Unicable (EN50494)
The antenna system with a channel router feeds one cable and is designed to receive the full
channel selection. For this purpose, each receiver is assigned one specific frequency in the
satellite frequency range (950-2150 MHz). The channel router has multiple fixed frequencies
(SCR-Freq.) saved in a frequency bank,
the SCR number and the SCR frequency must match;
see the instruction manual for the channel router.
Tandem
(for connections with just one satellite antenna cable)
In the “Tandem” setting, the two DVB-S receivers, which are connected to the SAT bridge
cable, are supplied by
one
feed line
There are limitations on recordings (PVR recording) and PIP.
It is only possible to combine stations on the same level (H/V).
Radio
Internet portal
Recordings archive
TV
Functional overview
20:10
Music
Medie Player
Photos
Videos
Analogue
Network
USB
HDMI
Filemanager
Remove USB Device
Manual
Parental control
Menu
Autom. On/Off
■ MANUAL
Network
AV devices
Sound
Picture
Menu
20:10
Radio station list
TV station list
Subtitle
Service
Parental control
Recordings/EPG
Bluetooth
®
Terrestrial
Analog-TV
Cable
Satellite
■ MANUAL
OK
OK
Configuration
OK
Satellite
H H H
EXPERT
DVB-S
Aerial facility
BACK
Twin SAT
Tandem
JESS (EN50607)
Unicable (EN 50949)
Manual search
Power compensation Aus
■ MANUAL
■ OPERATION LEVEL
EXIT
Single cable
Aerial facility
Satellite
4
4
4
