background image

 

13 

 

• 

Operation: 

The device can be operated only after verify if the Disc and the Nozzle are locked, and if 

the device’s voltage is the same as the mains. 

 
After verified all those items, follow the operation procedures: 
 

• Connect the power cord to the electrical outlet;

 

 

 
• Verify if the Tray is placed on the base;

 

 

 
• Rise the Mobile Cover using the Knob. Insert food on the Nozzle and press On/Off Switch in position 
“1” (On). At this point, the Disc starts spinning; 
 
• To Disc spins, lower the Cover by  the Knob and lightly press the food against the Disc.  For best 
process performance, perform push and relieve pressure on food against disc. Increase the pressure 
gradually during food processing; 
 
• The processed food comes out from the bottom of the Nozzle, falling inside the Tray; 
 
• After finishing the process, turn the device off by pressing the On/Off Switch in position “0” (Off);  

 

•  Remove  from  Tray  the  processed  food.  Disassemble  the  Nozzle  (as  instructed  on  assembly  and 
disassembly procedure) to remove the food that eventually is accumulated inside the Nozzle.

 

 

TIP 

 

To shred and to grate soft cheese and chocolates, it is necessary to freeze them, to firm this 
foods, making the processing become easy. This procedure avoids the transformation of the 
processed  product  into  paste  (this  prejudice  the  process),  making  the  product  departure 
from the bottom of the Nozzle get harder. 

 

 

                    WARNING! 

 

If  the  device  cannot  process  the  product  or  stops  processing,  reduce  the  quantity  or  food 
size on pre-cut, before insert it on the Nozzle. The excess pressure on Mobile Cover to press 
food against the Disc also may prejudice the speed and performance of the Electric Motor, 
Disc, and device’s life cycle. 
 
Failure to follow these guidelines will be considered unsafe act and machine abuse. 

 

                     

        WARNING! 

 

Never  try  to  remove  the  Nozzle  or  the  Disc while the  device  is  turned  on,  also  never  place 
fingers, hands or objects (spoons and knifes) on Disc, it might cause an accident. 
 
Always  use  the  Mobile  Cover  Knob  to  process  food,  never  use  your  hands  or  objects  to 
push food against the Disc during operation. 
 
Any irregularity contact the nearest authorized service. 

 
 

Summary of Contents for BIMG RDA Series





















Reviews: