10
The Terminal Block shown on figure beside is an additional protection to the main
supply grounding, it must be connected to a bar of Grounding Terminals, not
depending on the main supply connection, other devices that have accessible
metal parts and are stationary, must also be connected to this bar, as well as the
workbench, if it is metallic. This way, all devices will be at the same electric
potential avoiding harmful electric current.
The device is mono-voltage, ie it operates at 110 V, 127 V or 220 V. If you need to change the
voltage of your device, contact the manufacturer or your authorized dealer.
WARNING!
Before connecting your device, always checks if the main supply voltage is the same as the
device voltage. If it is not, proceed changing the voltage on the device as instructed.
The supply voltage of the mono-voltage devices is 110, 127 or 220 V (60 Hz) and 220 V (50
Hz), as can be seen in the voltage label pasted on the power cord or as indicated on the
identification label, which is on the back of the device (see figure of this label in item 2.2 of
this manual).
Make sure that the main voltage where the device will be installed is compatible with the
voltage shown in those labels.
For more details about the electrical part of the device, see the wiring diagram in the
manual.
IMPORTANT
The manufacturer is not responsible for possible direct or indirect damages caused by non-
compliance with rules and instructions in this manual.
3.3 Security Measures and User Instructions
The
professional who sell the device must instruct the user about the correct operation and
must deliver him this instruction manual.
The user must be informed about the necessary safety measures and have to respect them,
and also respect all the measures described in this manual.
4.
Device’s Use
4.1 Utility
This device was made only to shred, grate coconut, cheese and other products.
Summary of Contents for BIMG RDA Series
Page 1: ...1...
Page 18: ...18 Exploded Drawing...
