Mettler Electronics Corp. — Rev.G_06/28/12
2
FCC Frequency Interference Statement
Warning:
This equipment generates and uses radio frequency energy, and if not installed and operated in strict
accordance with the manufacturer’s instructions, may cause radio frequency interference.
Notice 1:
This equipment has been verified to comply with the specifications in Part 18 of FCC Rules, which are
designed to provide reasonable protection against radio frequency interference. However, there is no
guarantee that interference will not occur in a particular installation.
Notice 2:
If this equipment is found to be the source of radio frequency interference, which can be determined by
turning the equipment off and on, the user should try to correct the interference by one or more of the
following measures:
•
Reorient the receiving antenna (as applicable).
•
Relocate the Sonicator with respect to the receiver.
•
Move the Sonicator away from the receiver.
•
Plug the Sonicator into a different outlet than the receiver.
•
If necessary, the user should consult with the dealer or manufacturer for additional suggestions. (The
user may find FCC’s “Interference Handbook” helpful. It is available from the U.S. Government Printing
Office, Washington, D.C. 20402, Stock No. 004–000–00450–7.)
Notice 3:
The manufacturer is not responsible for any interference caused by unauthorized modification to this
equipment.
Mettler Electronics Corp.
1333
S.
Claudina
St.
Anaheim,
CA
92805
Toll
Free:
(800)
854–9305
or
(714)
533–2221
