Mettler Electronics Corp.—
Rev.F_07/03/12
12
2.4
Laser and Cluster Applicators – Controls, Output aperture and Indicators
1
3
5
2
4
6
Figure 2.2—Laser Applicator Description
1. Laser Output Aperture
4. “Laser Activate” Capacitance Switch
2. Aperture Warning Label
5. Increase Output Energy (repeat dosage)
3. Laser On Indicator
6. Decrease Output Energy
Laser Warning Labels
The laser applicator has four warning labels, two of these labels are visible on figure 2.2. These two
labels are the international Laser Hazard symbol which is located on the “Laser Activate” capacitance
switch pad, and the other is the yellow Laser Aperture label which has an arrow pointing to the laser
aperture at the front of the laser applicator.
The two other labels are shown in figure 2.3 below.
1
2
Figure 2.3—Laser Applicator Label Descriptions
1. Laser Aperture Label
2. Explanatory Label
