Mettler Electronics Corp.—
Rev.F_07/03/12
16
on
off
Figure 3.1— Laser Sys*Stim 540, Controls and Receptacles Located on the Front of the Unit
Figure 3.2— Laser Sys*Stim 540, Power Cord Connection
8.
The laser can be turned off at any time by turning the "ON/OFF" keyswitch counter-clockwise.
The displays on the panel will disappear, except the Charging indicator, if the unit is connected
to the wall outlet.
9.
Do not use the Laser Sys*Stim 540 in close proximity to operating shortwave diathermy devices.
10. The Laser Sys*Stim 540 has been designed to comply with EN 60601-1-2: 2002 but this does
not guarantee that other equipment in the vicinity will not be affected by the electromagnetic
emissions from this unit. Similarly, other equipment in the vicinity may effect the operation of the
Laser Sys*Stim 540.
It is recommended that all equipment used near this unit comply with the relevant
electromagnetic compatibility requirements for that equipment and to check before use that no
interference is evident or disruptive. Increasing the distance between offending devices, and
keeping interconnecting leads as short as possible, will help reduce any effect.
11. The Laser Sys*Stim 540 is not suitable for use in the presence of flammable gases and
anaesthetics.
12. The laser or cluser applicators contain a semiconductor laser diode or SLD diodes, glass optical
elements and sensitive electronic circuits. Rough handling or jarring or dropping may adversely
affect the output performance. Careful handling of these applicators will prolong the life of the
applicators and preserve their output characteristics.
13. The Laser Sys*Stim 540 treatment applicators have not been designed to be used on open
wounds or broken skin. Use in the presence of these conditions is not recommended and is not
an intended use of the device.
