APT
– User’s Manual
Rev.C_11/19/13
19
7. GENERAL MAINTENANCE & STORAGE
The rugged design of the
Active Passive Trainer
and the use of selected, modern materials ensure minimal re-
quirements for care and maintenance. The
APT
can be lifted safely in its folded position by grasping on to the centre
of either of the legs of the base and carrying like a suitcase.
NOTE:
Improper handling or neglect in the care of the
Active Passive Trainer
may reduce or cancel the coverage of
the manufacturer’s warranty.
7.1. Regular care
Inspect Power supply cables and plug for visible damages.
Check power-input connector for visible damage or insecure fastening.
On a regular basis check that all screws and components are fastened tightly.
Ensure that the anti-slip pads under the base are always kept clean.
CAUTION: If any damage is detected – do not use
APT
. Please contact your authorized dealer. Only au-
thorized personnel may carry out repairs.
7.2. Cleaning instructions
Disconnect Power Supply and wipe dry with clean cloth.
CAUTION: For safe disconnection of the
APT
always
take the mains plug out of the wall socket
before
removing the connector from the
APT
power socket.
Take care not to allow water to enter the unit. Keep cables and electric components away from water and
humidity.
7.3. Storage
Store
the
APT
between –20 and +40 degrees C and between 10% and 80% humidity.
For storage in a confined space, fold the
APT
unit by pulling the angle release knob (Figure 1-2) and lower-
ing it to the flat position. Tighten the angle-securing knob (Figure 1-3) to prevent unintentional unfolding.
