APT
– User’s Manual
Rev.C_11/19/13
12
Step 4
: Install the finger protection discs (Fig. 8-1) by sliding them into the grooves on the outside edges of the crank
arms (Figure 8-2) in the direction shown.
NOTE:
The finger protection discs are important for safe operation of the unit during hands exercise.
Step 5:
Insert handgrip (Figure 9-1) in one of the four mounting holes (Figure 9-2) in each of the
APT
crank arms. In-
stallation or removal requires only a straight push or pull while simultaneously pressing on the release pin
(Figure 9-3) at the end of the handle.
NOTE
: The choice of mounting hole provides variable resistance levels and ranges of motion. See operation
instructions.
Figure 8 Figure 9
finger protection discs and crank handgrip and crank
Step 6:
Plug the power supply mains power plug into the electrical socket outlet (Figure 5-3). The
APT
will enter a
stand by position.
To start operating,
press the
button. The green ACTIVE mode indicator will light up.
You may start exercising in the ACTIVE mode. For operation instructions, see 5.1 & 5.2.
NOTE
: If the
APT
moves across the table during arm exercises, anti-slip pads (Figure 8-3) may require
cleaning.
