Metrotech MetroMark i5000 Series Operation Manual Download Page 56

Page: 56 / 62

| i5000™ MetroMark™ Manual

Doc. No.:

R12015

6.2.6.3

Record Mode

Record Mode allows the user to select the data logging format. Two choices are available for selection

- on

Depth

on Depth + Timer

. Check with your supervisor what record mode should be used.

Figure 6-52 Record Mode in Data Logging Menu

6.2.6.4

Marker Read History

The marker read history provides a data log of RFID recorded serial numbers.

Figure 6-53 Marker Read History in Data Logging Menu

The collected data include the date, marker type, and serial number of each marker that is successfully read. The

data log information will be stored in the receiver’s memory until the unit is synchronized with MyLocator.

Figure 6-54 Marker Read History Log in Data Logging

Summary of Contents for MetroMark i5000 Series






























































Search results

Summary of Contents for MetroMark i5000 Series

Reviews:

Brands by name

Popular brands

Metrotech MetroMark i5000 Series, Operation Manual

Search results

Summary of Contents for MetroMark i5000 Series

Reviews:

Brands by name

Popular brands