manualshive.com logo in svg

Metrotech MetroMark i5000 Series, Operation Manual

Share
Download
Metrotech MetroMark i5000 Series Operation Manual Download Page 51

 

Metrotech Corp.  |  

41

Metrotech Copyright © 2008  

Doc. No.: 

R12015

Selecting Ticket management places the shortcut to Ticket Management (

TKT

).  Ticket Management takes you to 

the Data Logging Menu where you select Tickets.

Figure 6-39 Ticket Management Selection in Shortcuts Menu

Selecting the Line Locate (

LL

)/Marker (

M

) Switch softkey shortcut allows the user to easily switch between the 

line locate mode and marker mode during normal use.  Press the <LL> shortcut softkey to switch to line locate 

mode.  Press the <M> shortcut softkey to switch to marker locate mode.

Figure 6-40 Line Locate/Marker Switch Shortcut Menu Screen

The

 Smart Marker Read 

will only function as described if used on an i5000 MetroMark receiver.  Selecting the 

Smart Marker Read (

Read

) shortcut softkey allows the user to initiate the RFID marker read function from the 

operational interface.  Access to reading active electronic RFID utility markers is available only with this shortcut 

softkey.

Figure 6-41 Smart Marker Read Screen in Shortcut Menu

Summary of Contents for MetroMark i5000 Series































































Reviews:

No comments

Brands by name

Popular brands

Load more brands