manualshive.com logo in svg

Metrotech MetroMark i5000 Series, Operation Manual

Share
Download
Metrotech MetroMark i5000 Series Operation Manual Download Page 50

40

  |  i5000™ MetroMark™ Manual

Doc. No.: 

R12015

 

Metrotech Copyright © 2008

6.2.5 Shortcuts Menu

Shortcuts set the right-most softkey to a selection of features including Volume adjustment, Backlight Power, and 

Ticket Management.

To access the shortcuts menu, use the 4-way navigation button to highlight Shortcuts.  The chosen menu is la

-

beled at the top of the menu screen.  

Press the <Select> softkey to open the desired menu screen.  Press <Back> to return to the operational interface.  

Use the 4-way navigation button to select another menu.

Figure 6-36 Shortcuts Selection in Main Menu

Use the 4-way navigation button to move up and down the Shortcuts list.  Press the <Select> softkey to activate 

or deactivate the options.  Press the <Back> softkey to return to the previous interface.  

Selecting

 Adjust Volume 

places the shortcut to Adjust Volume (

VOL

).

Figure 6-37 Adjust Volume Selection in Shortcuts Menu

Selecting 

Backlight Power

 places the shortcut to Backlight Power (

BL

).

Figure 6-38 Backlight Power Selection in Shortcuts Menu

Shortcuts

Selection 

Summary of Contents for MetroMark i5000 Series































































Reviews:

No comments

Brands by name

Popular brands

Load more brands