Metronic DV3, Operating Manual

Page: 4 / 50

Overview of equipment
Front side of the receiver
1 - Infrared sensor for the signals of the
remote control
2 LED POWER LED is illuminated if the receiver is
switched on or in standby mode
3 LED STBY
ON LED is only illuminated if the receiver is in
standby mode
4 CH+ key Switches to the next higher channel
location
Cursor moves up
5 CH- key Switches to the next lower channel
location
Cursor moves down
6
Standby Switches on and switches to the standby
mode
Rear side of the receiver
1 LNB IN LNB connection for the antenna cable
2 IF OUT LNB connection for a second satellite
receiver
3 VCR (output) SCART connection for the video set
4 TV (output) SCART connection for the TV set
5 RS 232 Serial port
6 DC IN 12V Connection 12V/power pack
7 SPDIF Digital coaxial audio output (COAXIAL)
8 AUDIO L Analogue audio connection L(left)
9 AUDIO R Analogue audio connection R(right)
10 IR EXT Infra red extension socket
4