Getting started
Remote control
Two Micro type batteries are required for the remote control:
LR 03/AAA/1.5 V
Ö
Open the battery compartment.
Ö
Insert two batteries into the battery compartment paying
attention to the indicated polarities and push the cover of the
battery compartment carefully until the cover is locked.
Ö
Replace discharging batteries on time.
Ö
Always replace both batteries simultaneously and use batteries
of the same type.
Ö
If one battery has leaked, wear protective gloves and clean the
battery compartment with a dry cloth.
Caution!
Batteries may contain toxic agents that are hazardous to health
and environment. Therefore, dispose of the batteries immediately
according to the prevailing statutory regulations.
Never throw the
batteries into normal household waste.
The remote control transmits infrared signals to the receiver.
Please refer to the overview of the remote control for the
functioning of the keys.
Ö
Point the remote control towards the front side of the receiver
and slightly press the corresponding key once.
Receiver
Caution!
Check the proper connection of all devices and of the antenna
25
Summary of Contents for DV3
Page 1: ...1 ...
Page 2: ...2 ...
Page 21: ...Connection diagram IR IN COAXIAL 21 ...
