before connecting the external power pack or the 12 V cable of
the receiver to the power source and starting the receiver.
Ö
Insert the mains plugs of the connected equipment in the mains
socket and switch it on.
Ö
Switch on the AV channel of the TV set.
Ö
Insert the power pack of the receiver in the mains socket. The
device is in normal mode. The red LED is lit.
Ö
If you wish to operate the receiver with 12V, insert the 12V
mains cable in the “DC IN“ socket and connect it to your power
source.
The receiver is supplied with pre-programmed TV channels and
can be used directly. If you want to check if new channels are
available, initiate a scan for broadcasting stations. Read the
information further below for this purpose.
L
To get into standby mode, press the red key at top right of
the remote control. The red and the green LED of the
receiver are lit.
26
Summary of Contents for DV3
Page 1: ...1 ...
Page 2: ...2 ...
Page 21: ...Connection diagram IR IN COAXIAL 21 ...
