METRON Duo(+), User Manual, Page: 17 / 24

15 Operation
Operation
If you forget the WiFi password you’ve set, you (or installer) need to do the following:
•
Disconnect the charging station’s power, open the Micro EVSE 3 EV charge controller box to see the
electronic printed circuit board.
•
Energize the charging station and carefully (without touching anything else) press the small tact button
marked as “PB1” for 2-3 seconds; WiFi name (ssid) is reset to default value “METRON Station 1” and
forgotten password is reset to default value 12345678 but it’s not yet activated.
•
To activate default WiFi password (and default WiFi name) you need to disconnect power wait for a
few seconds and turn the power back on.
The METRON Charge Control application is intuitive and usually doesn’t need more instructions to be used;
just browse and explore the functions (some important user instructions are explained where the additional
user info is required). If you don’t understand something please feel free to contact Metron.