METRON Duo(+), User Manual, Page: 16 / 24

14 Operation
Operation
METRON Charge Control application (standard for “+” models)
In order to connect to the WiFi METRON Charge Control application you need to do the following:
•
Make sure the charging station is energized (connected to power).
•
Go to WiFi menu in your smart phone, tablet or laptop PC and search for WiFi networks.
•
Find “METRON Station 1” network and connect to it; enter the WiFi password 12345678 (this is default - it
is recommended that you change it in the METRON Charge Control application).
•
Scan QR code you find on the charging station and follow the link (it will open your default web
browser and launch the Metron Charge Control automatically; OR open your favorite web browser and
go to the following IP address: http://192.168.4.4
•
The METRON Charge Control application will be loaded immediately. Up to 5 users (devices) at a
time can be wirelessly connected to the charging station and all connected devices will automatically
receive all the latest data; for example, if one user changes the charging current with the slider all others
will see that on their screens.
The web-based METRON Charge Control application functions:
•
User can set the desired charging current and delay charging start.
•
User can turn on/off solar SURPLUS charging if solar power plant
is installed.
•
User can see all the real time measurements of charging power,
charging current and charging energy.
•
Allows the user to change WiFi password and WiFi name (ssid).
•
Allows the user to connect the charging station to local WiFi
network and also set the charging station internet access in the
WiFi router (advanced users).
•
Allows OVER THE AIR application UPDATES via WiFi by manufacturer, certified installer or even advanced
user.
•
If dynamic charging with house main fuse protection is enabled/connected the user can also see
house load, house energy consumption, solar power and solar energy production.
Metron charging stations with “+” mark have a built-in WiFi access point
with web server what enables users to connect to it wirelessly by any
smart phone, tablet or laptop PC. As there is a web server inside with
preloaded METRON Charge Control application you don’t need to install
any additional program/application on your device because the METRON
Charge Control runs in your favorite web browser (Google Chrome,
Microsoft Edge, Mozilla Firefox...) on any operating system (Google
Android, Apple iOS, Microsoft Windows, Huawei HarmonyOS, Linux...)
you have on your smart phone, tablet or laptop PC.