METRON daeg SPO2, User Manual

Page: 7 / 20

www.metron-biomed.com
7
daeg Specifications
SPO2 SIMULATION
GENERAL
Factory installed, downloadable and user
programmable R-curves, patient conditions
and templates.
Probe signal and LED test
ACTIVE PROBE SPO2 SIMULATION
O2 saturation range: 35
– 100 %
Simulation resolution: 1% SpO2%
Simulation accuracy:
±
0.5 SpO2% 65-100% SpO2%
±
1 SpO2% 30-64% SpO2%
Simulation repeatability:
±
0.2 SpO2%
Simulation rate: 30
– 300 bpm
Rate resolution: 5 bpm (sync. to ECG
for
“C-lock” testing)
Rate accuracy:
±
0.1%
Pulse amplitude 0
– 100% of nominal
pleth amplitude.
Amplitude resolution: 0-10 range, 1%
10-100 range, 5%
Amplitude accuracy:
≥
30% amplitude
±
1%.
1-29% amplitude
±
5%.
Pigmentation: Low, medium and high
Light repeater bandwidth:
DC
– 1MHz
Optical slew rate: 50 mcd/ s
Light repeater dynamic range:
1mcd + 13 dB
– 60 dB
Receiver optical 3 dB bandwidth:
600
– 1050 nm.
INSTALLED R-CURVES
BCI Oxipuls
Criticare
Nellcor
HP
Ohmeda
ADDITIONAL R-CURVES
These are R-Curves that are available and
can be uploaded using the PRO-Soft
daeg
software.
BCI Oxipulse 3301
Criticare 504
Dolphin 2100
HP/Philips
Massimo
Nellcor N-20, N-180, N-200, NBP-40,
Symphony
Nonin 8500 & Marquette Apex
Novametrix Oxypleth
Ohmeda 3700, 3740
Welch Allen Propaq
INSTALLED PATIENT CONDITIONS
Normal patient
Geriatric patient
Obese patient
Patient with weak pulse
Bradycardia
Tachycardia
ARTIFACTS (ACTIVE PROBE ONLY)
Motion: 0 - 4Hz
Ambient sunlight: Ambient, Sun
Interfering light: 50Hz, 60Hz
PROBE LED OPTICAL FREQUENCY
Frequency range: 550
– 1050 nm
Resolution: 1nm
Accuracy:
±
2% of range
PROBE TEST
Available with PTA-1 Probe Test Adapter Box -
Tests cable, photo sensors, Red LED and IR
LED.
Interface for Nellcor and Ohmeda type sensors
as standard.
Adapters for most major manufacturers
available.
LED current continuity tests.
Photodiode response test with numerical
display of light transfer function, 0-100%
Advance cable test by detecting response
glitches when flexing the cable.
ECG SIMULATION -
GENERAL
The data below is related both to factory installed
and downloadable waveforms.
Lead configuration:
5 lead RL, RA, LA, LL, V1-6
Low level output amplitude:
0.2-2mV, resolution 100 V
Low level output impedance:
1000 ohm to RL
High level output amplitude:
0.5V/mV of low level.
High level output impedance: 50 ohm
System amplitude accuracy:
±
2% @1mV
System rate accuracy:
±
0.1%
System time resolution: 10 s
(100 kHz maximum update rate)
ECG OUTPUT
The data below is related to factory installed
waveform types.
NORMAL ECG SINUS
30
– 300 BPM, resolution 5 BPM
(synchronized with pleth wave)
ACCESSORIES
Battery Eliminator 240V or 115V
Batteries
User/Service Manual
OPTIONS
PTA-1 Probe Test Adapter Box
SpO2 Probe Adapters (check availability)
Carrying case
Universal Snap-to-Banana Adapters
GENERAL INFORMATION
POWER SUPPLY
Power sources: 4 standard AA/LR6/MN-1500
cells.
230VAC/115VAC to 9vDC battery
eliminator.
Power consumption:
200 mA w/o display backlight.
400 mA w/full backlight.
Battery lifetime:
12 h for alkaline cells without
backlight.
HOUSING
High impact plastic case.
DIMENSIONS
Height:
237 mm/9.2”
Width:
122 mm/4.8”
Depth:
42 mm/1.6”
WEIGHT
With battery: 0.6 kg/1.3 lb
TEMPERATURE
Storage temperature:
0/32 to +50/122 C/F
Operating temperature:
+ 15/59 to +35/95 C/F
HUMIDITY
Operating humidity:
10% - 80% (non-condensing)
DISPLAY
Graphical LCD, with backlighting.
CONNECTORS
9V DC power inlet (standard 2.1 mm power
jack.
RS-232/C for PC or printer communication (9-
pin D-sub male)
1 probe connector (Redel 8-pin).
5 low level ECG outputs RA, RL, LA, LL and
V1 (AHA color coded safety connector)
1 high level ECG output (standard phono jack).
RECOMMENDED PRINTERS
HP DeskJet, Canon Bubble Jet or compatible.
daeg SpO2 Analyzer
Ordering Information
Order no:
12700
: daeg SpO2 Analyzer
Accessories:
12715
: Finger Probe AFP-1
17030 : Battery Eliminator daeg , 240V
or
17027R : Regulated Battery Eliminator 115V
17031 : Battery package, 4-cells
12710: User and Service Manual (CD)
Options:
11150
: Carrying case
12711 : Probe Test Adapter Box
12712 : PRO-Soft daeg
12713 : PRO-Soft daeg , demo
12714 : User Manual PRO-Soft daeg
17024 : Universal Banana Adapter
SpO2 Probe Adapters
12761 : BCI Compatible Direct SpO2
12761N : BCI Compatible 9-Pin SpO2
12762 : Criticare Compatible Direct SpO2
12762N : Criticare Compatible 9-Pin SpO2
12764 : Datascope Compatible Direct SpO2
12764N : Datascope Compatible 9-Pin SpO2
12765 : Datex Compatible Direct SpO2
12765N : Datex Compatible 9-Pin SpO2
12766 : Philips Compatible Direct SpO2
12767 : Invivo Compatible Direct SpO2
12768 : Nihon Kohden Compatible Direct SpO2
12769 : Nonin Compatible Direct SpO2
12770 : Novametrix Compatible Direct SpO2
12773 : Simed Compatible Direct SpO2
12774 : Spacelabs Compatible Direct SpO2
12775 : Sensormedics Compatible Direct SpO2
12776 : Masimo Compatible Direct SpO2