Metrologic StratosS MS2220, Installation And User Manual

Page: 34 / 88

28
I
NSTALLATION
EAS D
EACTIVATION
SW1 and SW2 are the switch banks inside the Checkpoint device that set the deactivation range. The following is a list of
Checkpoint recommended switch bank settings.
Base Model Checkpoint Recommended Switch Bank Settings
MS2220 SW1 & SW2 switches 1 and 6 set to ON
All Stratos
S models have a connector labeled EAS In on the bottom of the unit. Metrologic has an optional EAS cable
(
MLPN
52-52511
x
) available for purchase for connection between the Checkpoint device and the Stratos S .
Figure 22. EAS Cable Connection (Bottom of StratosS)
The following figure shows the location of the EAS deactivation area for the Stratos
S . It is important to pass the entire tag
through this area to deactivate the security tag.
Figure 23. EAS Deactivation Area