FDI2056 Use
r’s Manual
v 2.0 r 1.1
– 03/13
Copyright © 2013 Metrolab Technology SA
43
www.metrolab.com
14400, 19200, 28800,
38400, 57000, 57600,
115200,
128000,
230400
ByteSize
Numeric
7, 8
FlowControl
Flow control
enumeration
none
xonxoff
ctsrts
Parity
Parity
enumeration
no
odd
even
mark
Port
Port name
COM1 to last system
COM.
This value must be set carefully;
if the port doesn’t exist the PDI emulator
application will exit and reboot the system, resulting in an endless startup / reboot loop.
StopBit
Stop bit
values
1.0
1.5
2.0
QuadratureSignalConfiguration
HasIndex
Boolean
true
false
When set to true, indicates to the system that the encoder connected to the
system provides an Index signal. This information is used to define the way the decoder
will behave when an index search is performed.
With index: the decoder waits until the index is found and sets its internal
counter to zero.
Without index: the decoder is set to zero immediately after the reception of the
IND command.
InvertA
Boolean
true
false
All InvertX parameters indicate whether the input signal is used in its direct form
or in its inverted version. This way, the direction detected by the bi-phase decoder can
be configured. The configured version of the signals A, B and Index are then directly
used to create a 90° index which must be positive.
InvertB
Boolean
true
false