Metrohm 756 KF Manual Download Page 51

Page: 51 / 163

3.11 User name, key <USER>

756/831 KF Coulometer, Instructions of Use

3.11 User name, key <USER>

The key <USER> manages the user names.

User names can be entered directly or selected with

the keys <

←

> and <

→

Name

Selection or input of user name.

Delete

Delete user name.

The display texts of the Coulometer are shown below at

the left. Inquiries which also appear in the standard

mode are highlighted in gray.

name:

User name (up to 10 ASCII characters)

User names can be entered directly or selected with

the keys <

←

> and <

→

The operator name is printed out in the report.

The operator name remains in the instrument until it is

deleted (or until the RAM is initialized).

If no operator name is to be printed out the operator

"blank" can be selected.

>delete

name:

Delete user name

Enter the name directly or select it with the keys <

←

and <

→

>. <ENTER> will delete the name from the

list of user names.

user

name: Boss

>delete

USER

Summary of Contents for 756 KF




































































































































































Search results

Summary of Contents for 756 KF

Reviews:

Related manuals for 756 KF

Brands by name

Popular brands

Metrohm 756 KF, Manual

Search results

Summary of Contents for 756 KF

Reviews:

Related manuals for 756 KF

Brands by name

Popular brands