Metrohm 756 KF Manual Download Page 151

Page: 151 / 163

7.5 Warranty and certificates

756/831 KF Coulometer, Instructions of Use

143

7.5.4

Certificate of Conformity and System Validation:
831 KF Coulometer

Certificate of Conformity and System Validation

This is to certify the conformity to the standard specifications for electrical appli-

ances and accessories, as well as to the standard specifications for security and

to system validation issued by the manufacturing company.

Name of commodity:

831 KF Coulometer

System software:

Stored in ROMs

Name of manufacturer:

Metrohm Ltd., Herisau, Switzerland

This Metrohm instrument has been built and has undergone final type testing

according to the standards:

Electromagnetic compatibility: Emission

IEC 61326, EN 55022 / CISPR 22

Electromagnetic compatibility: Immunity

IEC 61326, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5,

IEC 61000-4-6, IEC 61000-4-11

Safety specifications

IEC 61010-1, UL3101-1

It has also been certified by the Swiss Electrotechnical Association (SEV), which

is member of the International Certification Body (CB/IEC).
The technical specifications are documented in the instruction manual.
The system software, stored in Read Only Memories (ROMs) has been validated

in connection with standard operating procedures in respect to functionality and

performance.

Metrohm Ltd. is holder of the SQS-certificate of the quality system ISO 9001 for

quality assurance in design/development, production, installation and servicing.

Herisau, May 07, 2002

Dr. J. Frank

Ch. Buchmann

Development Manager

Production and

Quality Assurance Manager

Summary of Contents for 756 KF




































































































































































Search results

Summary of Contents for 756 KF

Reviews:

Related manuals for 756 KF

Brands by name

Popular brands

Metrohm 756 KF, Manual

Search results

Summary of Contents for 756 KF

Reviews:

Related manuals for 756 KF

Brands by name

Popular brands