METRODATA LTD
WCM1100 / WCM3100 / WCM-Serial
Quick Start Guide
76-02-082 Rev D
73 of 75
The Access Rights supported are:
None
No Access
Read Only
Only SNMP GET access is allowed
Read-Write
SNMP GET/SET access allowed
The Receive Traps parameter determines whether, under alarm conditions, Traps should
be sent to this Network Manager.
4.4 Saving the Configuration
Once the WCM has been configured, the configuration must be saved to the EEPROM to
provide non-volatile storage.
Metrodata WCM "" Alarms: Major
MAIN SET-UP
Global status <display>
alarm eXtension <menu>
Data port set-up <menu>
V.24 set-up <menu>
Management <menu>
System <menu>
Update EEPROM
Testing <menu>
Performance data <menu>
First CAPITAL - select item
<escape> - exit menu
To save the configuration, select “Update EEPROM” from the Main Setup Menu. At the
prompt, respond <Y> and the configuration will be saved.
If the configuration is changed and not saved to EEPROM, the configuration will be lost at
the next restart, whether a warm start or power cycle.
