Radiance 10/100 Mbps Services Line Card
72
auth password – a case-sensitive ASCII string (up to 50
characters in length) denoting the password
associated with the user when MD5 authentication is
specified.
priv – identifies the privacy protocol.
none – No privacy. Messages are not encryted.
des – Messages sent by the user are encrypted
using the DES protocol. This option requires a
privacy password.
priv password – a case-sensitive ASCII string (up to 50
characters in length) denoting the password
associated with the user when the DES protocol is
specified for encrypting messages.
group – specifies the access profile for the SNMPv3 user.
ro – read-only access to non-privileged objects.
rw – read-write access to non-privileged objects.
admin – full read-write access to all objects.
Example
:
Console> set snmpuser v3guest auth none priv none group ro
Console>
set snmpv1v2
Description
: Enable or disable SNMPv1 and SNMPv2c access.
Syntax
:
set snmpv1v2 <enable | disable>
Parameters
: enable – enable SNMPv1 and SNMPv2c access.
disable – disable SNMPv1 and SNMPv2c access.
Example
:
Console> set snmpv1v2 enable
Console>
set switch
Description
: Specify the forwarding mode.
Syntax
:
set switch <Transparent | 802.1Q>
Parameters
: Transparent – specifies transparent forwarding. The R821
is transparent to user data traffic.Tagged and
untagged frames are forwarded unchanged.
802.1Q – specifies that the R821 complies with IEEE
802.1Q VLAN bridge forwarding aspects. For more
information, refer to “IEEE 802.1Q Mode” on
page 47.
Example
:
Console> set switch transparent
Console>
set
systeminformation
Description
: Set system information.
Syntax
:
set systeminformation <administrative> [name <system
name>] [location <location name>] [contact <contact>]
Parameters
: administrative – the administrative SNMP community
string. The default is admin.
system name – a case-sensitive ASCII string (up to 50
characters in length) denoting the assigned adminis-