- 14 -
GB
Problem
Possible cause
Solution
Error code
E05
Cooking
temperature
exceeds
150°C in
function
“Cooking with
power levels”.
Turn off and
unplug the
appliance, let
it cool down
completely. Plug
it in again and
restart it. To cook
with a temperature
above 150°C, use
function “Cooking
according to
temperature”.
Error code
E07
Cooking
temperature
exceeds 240°C
in function
“Cooking
according to
temperature”.
Turn off and
unplug the
appliance, let
it cool down
completely. Plug
it in again and
restart it.
Error code
E08
Temperature
below 40°C
for 6 minutes.
Probably an
unsuitable
vessel is being
used.
Unplug the
appliance and
use it again
with a suitable
vessel. If error
code continues,
contact
authorized
service facility for
repair.
LED display
shows _L_
when turning
appliance on
or off.
Temperature
of cooktop
surface under
50°C.
Normal
temperature
indication. No
reason to worry.
LED display
shows _H_
when turning
appliance on
or off.
Temperature
of cooktop
surface above
50°C.
Normal
temperature
indication. No
reason to worry.
6. Product fiche
The energy consumption of a domestic electric
hob (EC
electric hob
) is measured in Wh per kg of water
heated in a normalised measurement (Wh/kg)
considering all cookware pieces under standardised
test conditions and rounded to the first decimal place.
Symbol
Value
Model identification
GIC3035
Type of hob
Induction cooker
Number of cooking zones
and/or areas
1 cooking zone
Heating technology
(induction cooking zones
and cooking areas, radiant
cooking zones, solid plates)
Induction cooking
zone
• Clean the fat filter at least once a week, if you use
the appliance regularly. If the appliance is only
used infrequently, clean the fat filter after every
use. Remove the fat filter from underneath the
appliance and clean it with a soft damp cloth and,
if necessary, a little mild detergent. Wipe with a
dry and soft cloth. Only insert a completely dry fat
filter into the appliance.
• If the fat filter needs to be replaced, please
contact your dealer for the original spare part.
• The appliance may only be used again after it is
dried completely.
Storage
• Before storage, always make sure that the
appliance is completely dry and cooled down.
• Store the appliance in a cool, dry place, protected
from moisture and out of the reach of children.
• Preferably store the appliance in its original
packaging.
5. Troubleshooting
WARNING!
• In case of failures or malfunctions, always unplug
the appliance immediately.
• Only perform the steps described in this
instruction manual! All further inspection,
maintenance and repair work must be performed
by an authorized service center or a similarly
qualified specialist.
• Should you require spare parts, always obtain
them from an authorized seller. Do not use
spare parts that are not recommended by the
manufacturer!
Problem
Possible cause
Solution
After
choosing
a function,
appliance
stays in
standby mode
and does
not operate.
An acoustic
signal
sounds.
There is no
vessel or an
unsuitable
vessel on the
cooktop.
Place a suitable
vessel on the
cooktop.
Error code
E00
Current
exceeds 15 A.
Use current
below 15 A.
Error code
E01
Voltage is
under 143 V.
Use voltage
above 143 V.
Error code
E02
Voltage is over
275 V.
Use voltage
below 275 V.
Error code
E03 / E06
Glass ceramic
temperature
sensor (NTC)
is damaged.
Contact
authorized
service facility for
repair.