Functional Description
IV - 18
Function/Arbitrary Waveform Generators
Functional Description (contd.)
To Set the Output
Amplitude
1. Press Sine
→
Ampl , to set the amplitude.
The amplitude shown on the screen when the instrument is powered is
the default value or the set value beforehand. When changing the
function, if the current value is valid for the new waveform, it will be used
sequentially. If you want to set the waveform by high level or low level,
press the Ampl/HLevel or Offset/LLevel button again, to switch into the
high level or low level parameter (the current operation is displayed in
inverse color).
2. Input the desired Amplitude
Use the keypad or the knob to input the desired value, choose the unit
and press the corresponding button.
Setting the
Amplitude
