Getting Started
Function/Arbitrary Waveform Generators
III - 15
Getting Started (contd.)
4. To use Digital Input
As shown below, there are three sets of buttons on the operation panel,
which are direction button, the knob and the keypad. The instruction below
will help you familiarize with the digital input function.
1. The up and down keys are used to shift parameters and the left and right
keys are used to shift digits.
2. Keypad is used to directly set the parameters value.
3. Knob is used to change a signal digit value whose range is 0~9.
Clockwise to increase 1.
5. To Use
Store/Utility Function
Those three buttons on the operation panel are used to call the store/recall,
utility and help function. The instruction below will help you familiarize with
these functions.
1. The
button is used to store waveform data and configure
information.
2. The
button is used to set the auxiliary system function, change
the output configure parameters, interface setting, system setting
information or perform the instrument self-test and read the calibration
information, etc.