METREL MI 3295, Instruction Manual

Page: 44 / 50

MI 3295 Step Contact Voltage Measuring System Maintenance
44
Fuse replacement
Figure 9.2: Fuse replacement procedure
There are two fuses on the front cover of the MI 3295S Station:

Fuse: 2 x T 6.3 A / 250 V, (5 mm

20 mm)
Fuses prevents from danger in case of a fault inside the instrument.
Warnings:

Disconnect all measuring accessories, switch off the instrument and
disconnect mains cord before opening the cover of fuse holder, hazardous
voltage inside!

Replace blown fuse with original type only, otherwise the instrument may be
damaged and/or operator’s safety impaired!
Position of a fuse can be seen in
Figure 4.1 in chapter 4.1 Front panel .
9.2 Cleaning
No special maintenance is required for the housing. To clean the surface of both
instruments Meter (MI 3295M) and Station (MI 3295S) use a soft cloth slightly moistened
with soapy water or alcohol. Then leave the instrument to dry totally before use.
Warnings:

Do not use liquids based on petrol or hydrocarbons!

Do not spill cleaning liquid over the instrument!