MI 2014 Cable Scanner
Section III Cable Scanner operation
30
16. Cable type
In this menu the active output (RJ45 or BNC) connector and different cable
standards/types can be set. The selected cable type is displayed in all functions
(excepting the Locator function)
For some cable and communication standards just two of four twisted pairs are used.
Shielded (STP, ScTP, FTP), unshielded (UTP) twisted pair cables and coax cables can
be set depending on the application.
Selecting the right cable type and standard easifies the Fast and Complete Tests since
nonselected pairs and shield are ignored in the
/ judgment. The
sign.is
displayed if wires or pairs not defined in the selected cable type are connected.
Selecting connector output and cable type/standard
1. Select Cable Type position with the rotary
switch. The latest set cable type/standard
is displayed.
2. Select a new cable type with
/
key
(6 different types RJ45 outputs and BNC
output are available). The currently
displayed type/standard remains in
memory until selecting a new one or
reinitializing the instrument.
4 twisted pairs shielded cable selected
BNC cable selected
Summary of Contents for MI 2014
Page 1: ...Cable Scanner MI 2014 Instruction Manual Code No 20 750 429...
Page 32: ......
