MI 2014 Cable Scanner
Section III Cable Scanner operation
19
The related wires, type and distance to fault
(if available) can be viewed by using
and
keys. During displaying faults the sign
is displayed.
test failed, shield is broken or not connected
If the test passed succesfully but additional
connections were detected that are not
defined in the set Cable Type following
items are displayed:
- the
and
signs
- the identification number if available
- pairs connected according to the set type
test conditionally passed, unselected connected
wires 1,2,3,6 detected
By using
key it can be switched between length and identification number (if
available).
The redundant wire and pairs connections
can be viewed by using
and
keys.
During displaying them the sign is
displayed.
test conditionally passed
(
pair 2 is connected. The
pair is not determined in the selected cable type)
Note:
If no Remote Unit is connected at the far cable end
?
Remote
is displayed.
Remotes #1 - #5 are applicable on all cable types.
Remotes #6 - #15 are applicable only on cables where all 4 pairs are used.
Complete Test is not applicable when BNC output is selected.
Summary of Contents for MI 2014
Page 1: ...Cable Scanner MI 2014 Instruction Manual Code No 20 750 429...
Page 32: ......
