MI 3143 Euro Z 440 V
Safety and operational considerations
11
Electromagnetic compatibility (EMC)
EN 61326
Electrical equipment for measurement, control and laboratory
use
– EMC requirements Class A
Safety (LVD)
EN 61010 - 1
Safety requirements for electrical equipment for measurement, control
and laboratory use
– Part 1: General requirements
EN 61010 - 2 - 030
Safety requirements for electrical equipment for measurement, control
and laboratory use
– Part 2-030: Particular requirements for testing and
measuring circuits
EN 61010 - 031
Safety requirements for hand-held probe assemblies for electrical
measurement and test.
Some further recommendations
EN 61557
Electrical safety in low voltage distribution systems up to 1000 V a.c.
and 1500 V d.c. - Equipment for testing, measuring or monitoring of
protective measures.
Part 1: General requirements
Part 3: Loop resistance
IEEE 81
– 2012
IEEE Guide for Measuring Earth Resistivity, Ground Impedance, and
Earth Surface Potentials of a Grounding System.
EN 60909 - 0
Short-circuit currents in three-phase a.c. systems
– Part 0: Calculation
of currents
Li
– ion battery pack
EN 62133 - 2
Secondary cells and batteries containing alkaline or other non-acid
electrolytes - Safety requirements for portable sealed secondary cells
and for batteries made from them, for use in portable applications
–
Part 2: Lithium systems
Note about EN and IEC standards:
Text of this manual contains references to European standards. All standards of EN
6XXXX (e.g. EN 61010) series are equivalent to IEC standards with the same number
(e.g. IEC 61010) and differ only in amended parts required by European
harmonization procedure.
